How to Setup Remote Desktop Client in Windows?Blog: Facebook: https://Faceb. The RdClient avoids high complexity and numerous configuration options in favor of a simple and clear arrangement of remote desktops. Basically RdClient is constructed similar to Windows Explorer. A Remote Desktop Gateway (RD Gateway) lets you connect to a remote computer on a corporate network from anywhere on the Internet. You can create and manage your gateways using the Remote Desktop client. To set up a new gateway: In the Connection Center, tap Settings Gateways.
The Domain Name System, or DNS, as it’s more commonly known, translates or converts domain names into the IP addresses associated with that domain. DNS is the reason you are able to find your favorite website by name instead of typing an IP address into your browser. This guide shows you how to configure a Master DNS system and one client.
Here are system details for the example used in this article:
DNS server configuration
Install the bind packages using sudo:
The /etc/named.conf configuration file is provided by the bind package to allow you to configure the DNS server.
Edit the /etc/named.conf file:
Microsoft Rd Client Setup
Look for the following line:
Add the IP address of your Master DNS server as follows:
Look for the next line:
Add your local network range. The example system uses IP addresses in the 192.168.1.X range. This is specified as follows:
Specify a forward and reverse zone. Zone files are simply text files that have the DNS information, such as IP addresses and host-names, on your system. The forward zone file makes it possible for the translation of a host-name to its IP address. The reverse zone file does the opposite. It allows a remote system to translate an IP address to the host name.
Look for the following line at the bottom of the /etc/named.conf file:
Here, you’ll specify the zone file information directly above that line as follows:
The forward.fedora.local and the file reverse.fedora.local are just the names of the zone files you will be creating. They can be called anything you like.
Save and exit.
Create the zone files
Create the forward and reverse zone files you specified in the /etc/named.conf file:
Add the following lines:
Everything in bold is specific to your environment. Save the file and exit. Next, edit the reverse.fedora.local file:
Add the following lines:
Everything in bold is also specific to your environment. Save the file and exit.
You’ll also need to configure SELinux and add the correct ownership for the configuration files.
Configure the firewall:
Check the configuration for any syntax errors
Your configuration is valid if no output or errors are returned.
Check the forward and reverse zone files.
You should see a response of OK:
Enable and start the DNS service
Configuring the resolv.conf file
Edit the /etc/resolv.conf file:
Look for your current name server line or lines. On the example system, a cable modem/router is serving as the name server and so it currently looks like this:
This needs to be changed to the IP address of the Master DNS server:
Save your changes and exit.
Unfortunately there is one caveat to be aware of. NetworkManager overwrites the /etc/resolv.conf file if the system is rebooted or networking gets restarted. This means you will lose all of the changes that you made.
To prevent this from happening, make /etc/resolv.conf immutable:
If you want to set it back and allow it to be overwritten again:
Testing the DNS server
There are a few things to look at to verify that the DNS server is working correctly. Obviously getting the results back are important, but that by itself doesn’t mean the DNS server is actually doing the work.
The QUERY, ANSWER, and AUTHORITY fields at the top should show non-zero as it in does in our example:
And the SERVER field should have the IP address of your DNS server:
In case this is the first time you’ve run the dig command, notice how it took 830 milliseconds for the query to complete:
If you run it again, the query will run much quicker:
Rd Client For Mac
Client configuration
The client configuration will be a lot simpler.
Rd Client App Setup
Install the bind utilities:
Edit the /etc/resolv.conf file and configure the Master DNS as the only name server:
This is how it should look:
Save your changes and exit. Then, make the /etc/resolv.conf file immutable to prevent it from be overwritten and going back to its default settings:
Rd Client Setup Iphone
Testing the client
You should get the same results as you did from the DNS server:
Make sure the SERVER output has the IP Address of your DNS server.
Your DNS server is now ready to use and all requests from the client should be going through your DNS server now!